您当前的位置： 中频熔炼炉设备，金属熔化炉厂家 中频熔炼炉设备，金属熔化炉厂家
河北快3今日开奖号码 www.pxpuu.tw 来源：中频熔炼炉锻造炉|高频焊机高频加热机|淬火机退火机 浏览：1,934 views 发布时间：2016-08-19
Product features and Applications
由于中频感应加热的原理为电磁感应，其热量在工件内自身产生，普通工人用中频电炉上班后十分钟即可进行锻造任务的连续工作，不需烧炉专业工人提前进行烧炉和封炉工作。由于该加热方式升温速度快，所以氧化极少，中频加热锻件的氧化烧 损仅为0.5%，煤气炉加热的氧化烧损为2%，燃煤炉达到3%，中频加热工艺节材，每吨锻件和烧煤炉相比至少节约钢材原材料20-50千克。其材料利用率可达95%。由于该加热方式加热均匀，芯表温差极小，所以在锻造方面还大大的增加了锻模的寿命，锻件表面的粗糙度也小于50um工艺节能，中频加热比重油加热节能31.5%～ 54.3%，比煤气加热节能5%～40%。加热质量好，可降低废品率1.5%，提高生产 率10%～30%，延长模具寿命10%～15%。
With the rapid development of China’s industrialization process, induction heating and rapid development. Due to the requirements of environmental protection and the price of coal, coking coal heating does not conform to the requirements of environmental protection, but also in the price and the economy is very uneconomical. On the other hand, at present industrial heating also large amount of use KGBS with silicon controlled rectifier as the main device of medium frequency heating equipment. Power factor low fee with large amounts of electricity can. With the spread of financial crisis, saving energy and reducing consumption, reduce costs has become small and medium-sized enterprises are very urgent problem. So we use induction heating experience nearly 12 years, successfully developed a JZ (IGBT) series of energy-saving type intermediate frequency.
The fast heating speed, high production efficiency, material saving, less carbon removal and cost, prolongs the service life of the mould
The medium frequency induction heating principle of electromagnetic induction, the heat in the workpiece itself, ordinary workers with intermediate frequency electric furnace work after ten minutes of continuous work of forging tasks without burning furnace professional workers ahead of the burning furnace and furnace seal. Due to the heating temperature rising speed, oxidation is so few, medium frequency heating forging oxidation burning loss of only 0.5%, oxidation and burning of gas heating furnace for 2%, coal-fired furnace reached 3%, intermediate frequency heating process materials, per ton forging and burning coal stove compared to at least save steel raw material 20-50 kg. Its material utilization rate can reach 95%. Due to the uniform heating of the heating mode, the temperature difference between the core and surface minimum, so in forging also greatly increased life of die, forging the surface roughness is less than 50um energy-saving technology, intermediate frequency heating the proportion of oil heating energy-saving 31.5% to 54.3%, than the gas heating energy saving 5% ~ 40%. Good heating quality, can reduce the rejection rate of 1.5%, improve the production rate of 10% to 30%, extending the life of the mold 10% ~ 15%.
Environmental protection features
- good working environment, improve the working environment and the company’s image, no pollution, low energy consumption
Induction melting furnace and furnace, workers will not be hot sun baking stove and smoked, can meet the requirements of the indicators of the environmental protection department, and establish external corporate image and forging industry development trend of the future. Induction heating is the most energy-efficient heating furnace in the most energy-efficient heating by the room temperature to 1100 degrees of the amount of less than 360 degrees of heat consumption.
The uniform heating, the minimum temperature difference between the core and surface, high precision of temperature control
Induction heating its heat in the workpiece within itself, so that the heating uniformity, core temperature difference is minimal. Application of temperature control system can realize the precise control of temperature to improve product quality and qualified rate.
Medium frequency melting furnace characteristics
A fast melting speed, good energy saving effect, low energy consumption, less burning loss.
B self mixing function, melting temperature and metal composition.
C electric heating operation environment is good.
D startup performance is good, the air furnace, the furnace can reach 100% start
Intermediate frequency furnace heating apparatus has the advantages of small size, the advantages of light weight, high efficiency, excellent heat processing quality and favorable environment is rapidly eliminated coal-fired stove, gas furnace, fuel furnace is a new generation of metal heating equipment.
Medium frequency furnace is casting forging and heat treatment workshop, the main equipment, the stability, reliability and safety is to ensure the stable work of the production line assembly line, casting, forging and heat treatment. Intermediate frequency furnace in the field of thermal processing has a good development prospect as before the main production forging heating furnace, diathermanous furnace and for diathermy, rolling, forging, elbow, heat treatment (quenching), welding and other process of induction heating.
|产品参数说明Product parameter description|
Product model WDSZ-25?
Working power supply three phase 380V?
Input power 25KW
Output voltage 70-550V?
Standby power <60w?
Discontinuous or continuous operation (continuous heating requires special custom)?
Shock frequency 1KHZ-20KHZ?
Working environment is basically clean?
Cooling water, water pressure 0.1MPa, warm water below 35 C?
10%~100% output power is not very adjustable
560*250*500 (mm), 360*265*400 (mm), the form size of the host
|使用效果图Use effect diagram|
|物流/快递说明Logistics / courier|
Contact address: Yongan City Guangdong Province Foshan Shunde Lunjiao Town sheep week Industrial Zone No. 9
2015 a letter to clients
You are good!
Today, wei disheng precision machinery co., LTD. Was established in the sixth anniversary of the day. This is a special day, in the past six years, the company all my colleagues work together to move beyond every footprint is worthy of our deep memories. Here, I would like to thank the new and old customers to wei in six years to have the company’s strong support, at the same time, special thanks to the company everyone colleague in six years of hard work. I, on behalf of the company and my personal greeting you most loyal blessing.
First of all, with the feelings of gratitude, sincere thank you to wei disheng company’s concern and support! Please allow me to occupy you little time to introduce our company: wei disheng precision machinery co., LTD., is in the induction heating equipment industry one of the most powerful manufacturers, professional research and development, production of high frequency, intermediate frequency, ultra high frequency induction heating equipment series products and electric corrosion of metal marking equipment series products, mainly used in all walks of life the hot working of metal material heat, heat treatment, assembly and welding, such as smelting process, the purpose is to use machine to replace artificial, improve the quality and efficiency of your company products, we provide products of high quality and low price, adopts imported from Japan, Germany, for your products provide a good quality, value and security guarantees. Companies adhering to the service is supreme, leading technology business philosophy, products are exported to the country and overseas.
Induction heating equipment as a necessity of modern hardware industry, more and more popular with companies and sought after. We is a great pleasure to be your buying consultant in induction heating equipment and have the opportunity to provide service for you. As long as you finish reading this letter, is to trust and support of our work! As long as you have for our quality and service requirements and Suggestions, will bring us inspiration and enlightenment!
In the past days, don’t know what kind of attitude towards you for induction heating equipment, but for the sake of the future, we sincerely hope that you are using induction heating equipment.
Induction heating technology is the metal material heated, the fastest, most efficient and low consumption advanced technology in environmental protection. Thank you in the past six years of wei have the support of the company, because with your support we can have today’s development and progress.
Through six years of development and accumulation, we deeply realized the importance of you in our development process. In order to can cooperate with you for a long time, we must have further ascension, at the same time in order to provide you with better service and higher added value products we must from the management system, product design and manufacturing and personnel reserve makes, thus can catch you quickly development steps.
Although our company after six years of development, but the current situation as an infant and children need you more tolerance and understanding.
In the past six years, we have been working on for you to develop the best operating system, and for you to find the lowest price, raw material suppliers, thus rendering the optimal ratio of the products to you.
From our current annual sales of 800 units, I think this way is to get your approval. But as time goes on, we found that the high frequency machine this is not fully standardized products there is a lot of space, can be optimized at the same time, after time of verification, we found some parts while prices are low but its durability and reliability is questionable, in this way, we help you to save the initial purchase cost, but for the pursuit of the concept of “sustainable development” will tell you, this will definitely give you added a stumbling block to create the way of independent brands.
Do it all, just for a goal, you can keep up with development steps, get your recognition, long-term cooperation with you.
On the occasion of the anniversary, we sincerely say “thank you!” , send your blessing:
I wish you have a long career, healthy body, a happy family!
Detail information please visit our website: //www.pxpuu.tw